AUTOOL BT460 Battery Tester adopts currently the world's most advanced conductance testing technology.
It can measure the actual cold cranking amps capability of the vehicle starting battery, healthy state of the battery more easily, quickly and accurately.
It can read common fault of the vehicle cranking system and charging system, which can help maintenance personnel to find the problem quickly and accurately, thus to achieve quick vehicle repair.
Notice: BT460 is designed for 12V , 24V
1. Simple and easy to use
2. Test batteries on and off the vehicle
3. Accurate results in milliseconds
Compared to other tester, the test results of Autool BT460 Battery tester are the same(tolerance ±15) when testing at the same time
4. Battery Life Analysis
5. Analysis Result : Good or Replace
6. Large easy to read LCD display.
7. Test results based on JIS, EN, DIN, SAE and IEC Standards.
8. Vehicle cranking system test — cranking time, voltage and status.
9. Vehicle charging system test — load voltage, unloaded voltage, ripple status and charging system status.
Test Result: Good or Replace
Capacity – Cold Cranking Amps (CCA), DIN, EN and IEC information relative to battery rating.
Internal resistance value (m )
Life in percentage (%)
1. Conductance correlates directly to the battery capacity
2. Passive testing method is safe.
3. Never discharges or drain the battery.
4. Able to test condition of discharged battery.
5. Consistent and repeatable results.
6. Provides unique indication of battery conditions.
7. Provides check the Alternator's charging and Starter's cranking conditions. It is maintenance free and no internal batteries required.
8. Powers up when connected to the battery posts during testing.
2. Directly detect bad cell battery.
3. Polarity reverse connection protection, reverse connection will not damage the tester or affect the vehicle and battery.
4. Directly test the battery with loss of electricity, no need to full charge before testing.
5. Testing standards include currently the world's majority of battery standards, CCA, JIS, DIN, IEC, EN, SAE, GB.
Measure Standard Measure Range
1x Battery clamp cable
1x User manual