65-72mm Mechanical Turbocharger Fuel Saver Intake Modified Accelerator Car-Styling Fit For 2.5L Displacement

List price: US $16.53
Price: US $14.88
You save:US $1.65 (10%)
Only 1 left in stock

Item Specifics

For Vehicle Brands/Model:
Audi
Item Weight:
60g
Brand Name:
PHYUN
Material Type:
Stainless steel
Special Features:
Fuel Saver
Interchange Part Number:
65-72
Country/Region of Manufacture:
CN
Manufacturer Part Number:
65-72
Item Width:
0cm
Item Length:
0cm
Item Height:
0cm
Placement on Vehicle:
65-72
Other Part Number:
65-72
Features:
Low noise
Fuel-efficient:
steam (diesel) oil engine
Model:
65-72mm
power improvement:
Engine power increas 40%.
Suitable for displacement:
2.0L / 2.5L
working principle:
Cyclone vortex quickly into the cylinder, increase engine power.

Product Description

Product Description

DESCRIPTION:

65-72mm Mechanical Turbocharger Fuel Saver Intake Modified Accelerator Car-Styling Fit For 2.5L Displacement

DESCRIPTION:

Quantity:1pc

Model:65-72MM (Need other models, please contact us)

Please note when buying:

Please pay attention to the displacement model:
1.6L / 1.8L / 2.0L normal diameter 59-54mm;
Japanese and German series:
2.5L four-cylinder commonly used specifications 60-65mm;
2.5L six-cylinder commonly used specifications 65-72mm;
3.0L-4.0L with conventional format 73-78mm
Korean car 2.0L commonly used specifications 60-65mm,
1.4 The following common specifications 41-46mm / 48-53mm
The above as a reference, when installed, the best measurement of air filter inlet pipe diameter shall prevail.

Product Features

1. improve air fuel ratio

The vortex swirling vortex is quickly pushed into the cylinder, increasing the instantaneous intake pressure and oxygen content of the air to achieve complete combustion, thereby achieving the maximum combustion effect with the least fuel. In order to improve the air fuel ratio. The 50 states use test, the maximum combustion ratio increased by 25%.

2. enhanced power
The same principle is to strengthen the perfect mixture of fuel and air to make the fuel particles more refined. The rapidly rotating combustion mode, improve engine power, reduce knocking phenomenon. According to the test of the world authority, the combustion rate in the combustion chamber can be increased by 80% and the engine power can be increased by 40%.

3. reduce pollution
As the air fuel ratio is greatly increased, the carbon monoxide (HC) and carbon monoxide (CO) produced by incomplete combustion are controlled. So it has a significant effect on preventing air pollution

4. reduce noise
This product is static under the production of rotating air flow, no noise. Due to the full combustion and power enhancement, it will undoubtedly change the running state of the engine. The noise is obviously reduced and the ride is more comfortable.

5. prolonging vehicle life
The burning is full and the carbon accumulation in the cylinder is greatly reduced. The piston, piston ring and working wear of the cylinder are reduced, and the maintenance cycle can be lengthened in addition to prolonging the life of the engine and reducing the failure of the power transmission system.

6. improve braking force and induction
Safety. To improve the induction, the vaporizer and the TBI engine can bring the effect of MPI.

7. improve the starting property
Cold car start more smoothly in winter, the use of air conditioning power in the summer no less.

8. safe and harmless safety and free pollution
Add new storm power to accelerate the fuel economizer, do not change the structure of the engine and car body, do not damage the engine, do not damage the original vehicle oil circuit and other accessories, will not cause any public nuisance.

Frequently Asked Questions:

1, size do not know how much?

Dear dear: Due to the car models are more, each car has a variety of sizes, with different models of different models produced by the throttle, air filter assembly, exhaust pipe, intake pipe size is different, First measure the size of the installation and then select the appropriate fuel economy for installation.

2, where installed?

There are two installation options: one in the throttle, air filter assembly installed in each one (see the physical installation diagram.) Second: exhaust muffler in the exhaust pipe installed behind each (due to the different design of the muffler to be installed two To three).

3, into the leaves will not fall into the cylinder?

No: The materials used in our products are all made of imported mild steel 316 Titanium, the blades are welded on the steel, the blades will not drive and the blades have a certain angle, so as to change the direction of the intake air to enhance the power, All blade welding machine used to ensure the quality of welding and stable, there will be no leaves fall into the cylinder situation!

4, loaded will go loose?

Measure the inner diameter of the throttle and the inner diameter of the air filter assembly Select the appropriate fuel economizer to install the product itself with a flexible, 5mm size range, can be securely stuck throttle and air filter assembly, product belt There are “U” shrapnel, you can “U” -shaped shrapnel outward with a batch move out to catch the throttle (see the throttle installation diagram).

5, installed really have a role?

Before and after the installation comparison: Before the installation: start the engine, observe the car:
1. Use a white tissue to put it on the exhaust pipe of the car. After a few seconds, you will notice that the white tissue will stick to the stain and smell a very rich fuel. Indicating that the car is not fully burned, and leave a lot of carbon inside the cylinder;
2. Note that the exhaust exhaust dry or humid, whether to take the white gas or drip phenomenon;
3. Note tachometer current idle speed. Step on the accelerator to observe the engine engine without shaking and noise situation;
4. Feel the sensitivity of the current throttle.

After installation: start the engine, and then observe the car:
1. Stepped on the accelerator several times, after a few minutes with the same white paper towel test will find the fuel flavor and smoke significantly reduced;
2. Exhaust exhaust humidity significantly enhanced, some cars will drip phenomenon at the same time;
3. There will be a small amount of idle speed changes, forced to step on the accelerator a few times will find the engine smooth and steady, the noise is significantly smaller;
4. Vehicle power was significantly enhanced, start sensitive, that your car engine combustion has undergone fundamental changes;
5. In summary, the lighter the throttle, speed up, power increased, so fuel consumption will also be reduced.
6, why do I have no effect on the installation?

Must be installed behind the airflow sensor, if installed in front of the airflow sensor is ineffective, at the same time after installation need to open some time and then check the fuel consumption and power have improved.

7, why not install the fuel-efficient but increased the amount of oil it?

Due to the power of the product after installation, but the driving habits or the original driving habits, the beginning of the oil will be increased, so used to the habit of installing the product after the car you read the inspection of oil will inevitably be reduced.

8, why some cars feel obviously some cars do not feel the effect?

If the intake pipe has been modified, for example: an increase of secondary oxygen device, change the air filter, increase other fuel-efficient products, then our products will appear on the installation of the feeling is not obvious, this is normal, etc. After you open a period of time to review the fuel consumption and low idling, there will be changes. If the intake pipe is not modified car, the installation of our products feel more obvious. Different car engines, the feeling will be different, this is normal.

How it works: The storm new power Fuel economy is based on aircraft engine air booster power technology from the computer to accurately calculate the angle of each wing and the design of the interference hole position will interfere with the spoiler through the different fins in the moment Forming a wind vortex, thereby increasing the amount of intake air and intake pressure, while making a fundamental change in intake mode, from the previous parallel into the whirlwind into the whirlwind into. (That is, laminar flow into turbulence, breeze into a cyclone process), so that oil and gas mixture, more fully burned.














Learn what other say about this product
How to make money with Bitcoin?
Online-money exchangers rating    
How to make money with Bitcoin?